Manufacture Technology GEFXL2-CSW28KX - Page 225

Publication date: March, 2012
Revision A1
215
1+1 : This will create a 1+1 EPS.
1:1 : This will create a 1:1 EPS.
 W flow:
The field you need to assign the working flow for the EPS. - See 'Domain'.
 P flow:
The field you need to assign the Protecting flow for the EPS. - See 'Domain'.
 W SF MEP:
The field you need to assign the working Signal Fail reporting MEP.
 P SF MEP:
The field you need to assign the protecting Signal Fail reporting MEP.
 APS MEP:
The field you need to assign the APS PDU handling MEP.
 Alarm:
There is an active alarm on the EPS. When you complete the setting then switch will show
the alarm status.
 Buttons:
Add new EPS - Click to add a new EPS entry.
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
 Upper right icon (Refresh):
You can click them for refresh the refresh information by manual.