Mark-10 WT3-201M User Manual

Model WT3-201M Motorized Wire Crimp Pull Tester User’s Guide
13
10 AUTO START
Auto start increases testing efficiency by automatically starting the test when the sample has activated the
switch, identified below:
To use Auto start, select Auto Start from the menu and press ENTER. The display appears as follows:
Select Enabled. It is recommended to combine Auto Start with Break Detection and Auto Return
automation functions for maximum efficiency. Refer to the following sections for details.
AUTO START
Disabled
* Enabled

Mark-10 WT3-201M Specifications

General

Brand	Mark-10
Model	WT3-201M
Category	Test Equipment
Language	English