Model WT3-201M Motorized Wire Crimp Pull Tester User’s Guide
17.2 Delete Data
The last data point may be deleted. To do so, press DELETE while highlighting the last data point
(Pressing DELETE while highlighting any other data point will have no effect). The letter “D” appears to
the left of the record number, indicating that the reading was marked for deletion, as follows:
Press ENTER to delete the value. The next most recent data point can then be deleted in the same
fashion. To exit Delete mode, press DELETE again. To delete all data points, refer to the Clear All Data
section.
17.3 Statistics
Statistical calculations are performed for the saved values. Calculations include number of readings,
minimum, maximum, mean, and standard deviation.
17.4 Output Load Data
Press ENTER to output data to an external device. The display will show, “SENDING DATA…”, then
“DATA SENT”. If there was a communication problem, the display will show, “DATA NOT SENT”. Saved
data can be downloaded to Mark-10 data collection programs. Refer to their respective user’s guides for
details.
17.5 Output Full Data
Press ENTER to output data plus time, date, and profile name to an external device (optional Profiles
and Date & Time Stamp functions required). The display will show, “SENDING DATA…”, then “DATA
SENT”. If there was a communication problem, the display will show, “DATA NOT SENT”. Saved data can
be downloaded by Mark-10 data collection programs. Refer to their respective user’s guides for details.
17.6 Output Statistics
Press ENTER to output statistics to an external device. The display will show, “SENDING STATS…”, then
“STATS SENT”. If there was a communication problem, the display will show, “STATS NOT SENT”.
17.7 Clear All Data
Press ENTER to clear all data from the memory. A prompt will be shown, “CLEAR ALL DATA?”. Select
Yes to clear all the data, or No to return to the sub-menu.
Note: For convenience, clearing all data can also be accomplished by highlighting Memory in the main
menu, then pressing DELETE.
0002 22.2 lbF
0003 24.6 lbF
0004 18.9 lbF
0005 19.9 lbF
D 0006 20.0 lbF
To Next Page
Loading...
Need help?
General
