MARS COMMERCE GSW2 PLUS 1000 - Table 3: Remote Alarm Reporting Parameters

GSW2 PLUS EXT
INSTALLATION MANUAL
Page 14
8.1.2 REMOTE REPORTING ALARM EVENTS
Parameters used to define the way to report the alarm event.
NOTE
GSW2 PLUS device send SMS messages for reporting alarm events.
8.1.2.1 TN parameters
Telephone numbers for remote alarm reporting are listed as TN parameters. Remote alarm reporting
on GSW2 PLUS is done via SMS messages.
8.1.2.2 LN parameters
This parameter is used to link alarm event from inputs or any other source to the telephone numbers
on TN list.
8.1.2.3 Table of parameters
Name
Comment
TN1
1
st
telephone number
TN2
2
nd
telephone number
TN3
3
rd
telephone number
TN4
4
th
telephone number
TN5
5
th
telephone number
LN1
Input & telephone No. linking for 1
st
alarm input (TN1 – TN5)
LN2
Input & telephone No. linking for 2
nd
alarm input (TN1 – TN5)
LN3
Periodic test SMS. No. linking (TN1 – TN5)
LN4
SIM card refill. No. linking (TN1 – TN5)
LN5
NAC list. No. linking (TN1 – TN5) ( see note)
LN6
Log status. No. linking (TN1 – TN5)
LN7
CLIP opening notification link (TN1 – TN5)
Table 3: Remote alarm reporting parameters