MARS COMMERCE GSW2 PLUS 1000 - Security Level - Sl; Table 7: SL Parameter; Table 8: SL Parameter Example

GSW2 PLUS EXT
INSTALLATION MANUAL
Page 18
8.3 SECURITY LEVEL - SL
SL parameter from 0 to 5 defines which telephone number stored in the phone book from TN1 –
TN5 can enter into programming and remote control of the GSW2 PLUS (dialing the GSW2 PLUS
phone number or sending the SMS).
NOTE
When the SL level is 0, an access to the GSW2 PLUS is possible from any phone!
IMPORTANT
Before any SL number is programmed the GSW2 PLUS can accept ALL
CALLS. Remote SMS programming and remote controlling is possible from
any phone!
Name / value
Comment
SL = 0
All calls and SMS are accepted
SL = 1
Only number stored under parameter TN1 has access to unit
SL = 2
Numbers stored under parameters TN1 to TN2 have access to unit
SL = 3
Numbers stored under parameters TN1 to TN3 have access to unit
SL = 4
Numbers stored under parameters TN1 to TN4 have access to unit
SL = 5
Numbers stored under parameters TN1 to TN5 have access to unit
Table 7: SL parameter
Example:
 Direct programming on the SIM card
GSW2 PLUS PROGRAMMING TABLE
Name
Number
Description
SL
3
Numbers stored under parameters TN1 to TN3 have access to
unit
Table 8: SL parameter example
 Remote programming by SMS
;SL=3;