MARS COMMERCE GSW2 PLUS 1000 - Table 15: Intercom Parameters; Table 16: Intercom Parameters Example

GSW2 PLUS EXT
INSTALLATION MANUAL
Page 28
8.7.4 Table of parameters
Name
Comment
LOT
Time out for voice connection.
ESC
Input used as cancle button
ATN1
Button 1, Telephone number 1.
ATN2
Button 1, Telephone number 2.
ATN3
Button 1, Telephone number 3.
ATN4
Button 1, Telephone number 4.
ATN5
Button 1, Telephone number 5.
RTNA
Button 1, time out control for voice connection.
SDNA
Button 1, DTMF number to send.
SDDA
Button 1, delay for DTMF number to send.
TZSA
Button 1, time zone start period.
TZEA
Button 1, time zone end period.
BTN1
Button 2, Telephone number 1.
BTN2
Button 2, Telephone number 2.
BTN3
Button 2, Telephone number 3.
BTN4
Button 2, Telephone number 4.
BTN5
Button 2, Telephone number 5.
RTNB
Button 2, time out control for voice connection.
SDNB
Button 2, DTMF number to send.
SDDB
Button 2, delay for DTMF number to send.
TZSB
Button 2, time zone start period.
TZEB
Button 2, time zone end period.
Table 15: Intercom parameters.
Example:
 Direct programming on the SIM card
GSW2 PLUS PROGRAMMING TABLE
Name
Number
Description
LOT
60
Voice connection stay valid for max of 60s, after this time
Voice connection breaks
ESC
2
Input 2 is used as cancel button
ATN1
040713470
Button 1, Telephone number 1.
ATN2
+38643364850
Button 1, Telephone number 2.
RTNA
30
Button 1, time out control for voice connection.
TZSA
6
Time zone start at 6.00
TZEA
14
Time zone ends at 14.00
SDNA
1
DTFM number to send
SDDA
3
DTMF number is send after 3s delay
Table 16: Intercom parameters example.
 Remote programming by SMS
;ATN1=040713470;ATN2=+38643364850;RTNA=30;TZSA=6;TZEA=14;
;SDNA=1; SDDA=3;