MARS COMMERCE GSW2 PLUS 1000 - Table 26: SMS Commands; Table 27: SMS Commands Example

GSW2 PLUS EXT
INSTALLATION MANUAL
Page 35
8.14.2 SDCLR command
To clear all data on SIM card SDCLR command is used.
8.14.3 LCRL command
Command clears log on GSW2 PLUS device.
8.14.4 CLPCLR command
Command is used to delete all CLP numbers.
8.14.5 MRES command
Command is used to manually restart GSM module on GSW2 PLUS device.
8.14.6 SSRES command
Command is used to manually restart GSW2 PLUS device.
8.14.7 Table of parameters
Name
Comment
ORC1
Control of output 1
ORC2
Control of output 2
SDCLR
Delete all SIM content
LCRL
Delete log on GSW2 PLUS device
MRES
Manual reset of GSM module
SSRES
Manual reset of GSW2 PLUS device
Table 26: SMS commands.
Example:
 Remote programming by SMS
SMS commad
Description
;ORC1=1;
Activate output 1
;ORC2=0;
Deactivate output 2
;SDCLR;
Clear all data on SIM
;LCLR;
Delete log on GSW2 PLUS device
;MRES;
Manual reset of GSM module
;SSRES;
Manual reset of GSW2 PLUS device
Table 27: SMS commands example.