11
11 ZEUS4-VD PARAMETERS
To support versatile functionality of ZEUS4-VD different parameters are used. The parameters are
divided in logical sections and are described in the following chapters.
11.1 SECURITY LEVEL
SL parameter from 0 to 10 defines which telephone number stored into the phone book from TN1 –
TN0 can enter into programming and remote control unit of the ZEUS4-VD.
When the SL level is 0, an access to the ZEUS4-VD is possible from any phone!
Before any SL number is programmed the ZEUS4-VD can accept ALL
CALLS. Remote SMS programming and remote controlling is possible from
any phone!
All calls and SMS are accepted
Only number stored under parameter TN1 has access to unit
Numbers stored under parameters TN1 to TN2 have access to unit
Numbers stored under parameters TN1 to TN3 have access to unit
Numbers stored under parameters TN1 to TN4 have access to unit
Numbers stored under parameters TN1 to TN5 have access to unit
Numbers stored under parameters TN1 to TN6 have access to unit
Numbers stored under parameters TN1 to TN7 have access to unit
Numbers stored under parameters TN1 to TN8 have access to unit
Numbers stored under parameters TN1 to TN9 have access to unit
Numbers stored under parameters TN1 to TN0 have access to unit
Table 1: SL parameter
Example:
Direct programming on the SIM card
ZEUS4-VD PROGRAMMING TABLE
Numbers stored under parameters TN1 to TN5 have access to
unit
Table 2: SL parameters example
Remote programming by SMS
;SL=5;