MARS COMMERCE ZEUS4 - Table 9: TN Parameters; Table 10: TN Parameters Example

ZEUS4-VD
INSTALLATION MANUAL
15
11.2.4 TN parameters
Telephone numbers for remote alarm reporting are listed as TN parameters. Remote alarm reporting
on ZEUS4-VD is done via SMS messages or VOICE call.
ZEUS4-VD makes a voice call, send alarm notification SMS message or both. If the corresponding
name ends with the letter “V” only VOICE call is made and if the name ends with the letter “M”
only SMS message is sent.
Table of parameters:
Name
Comment
TN1
1
st
telephone number
TN2
2
nd
telephone number
TN3
3
rd
telephone number
TN4
4
th
telephone number
TN5
5
th
telephone number
TN6
6
th
telephone number
TN7
7
th
telephone number
TN8
8
th
telephone number
TN9
9
th
telephone number
TN0
10
th
telephone number
Table 9: TN parameters
NOTE
By pressing * on your phone you switch OFF the redial call for calling number. The
remaining numbers are called as usual. By pressing # you switch off all remaining
calls.
NOTE
When VOICE is used for alarm reporting, the user has the possibility to control the
ZEUS4-VD activity with the various DTMF commands.
Example:
 Direct programming on the SIM card
ZEUS4-VD PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
TN1
042376678
1st telephone number (VOICE alarm & SMS message)
TN2V
040719479
2nd telephone number (VOICE alarm only)
TN3M
040308350
3rd telephone number (SMS message only)
Table 10: TN parameters example
 Remote programming by SMS
;TN1=042376678;TN2V=040719479;TN3M=040308350;