MARS COMMERCE ZEUS4 - 12 Print-Out of the Parameters; Receive All Parameters (Pall); Receive Telephone Numbers (Ptn); Receive Links (Pln)

ZEUS4-VD
INSTALLATION MANUAL
35
12 PRINT-OUT OF THE PARAMETERS
12.1 RECEIVE ALL PARAMETERS (PALL)
By sending this command to ZEUS4-VD you receive messages with all parameters that are
currently programmed in the unit. Send: ;PALL;
12.2 RECEIVE TELEPHONE NUMBERS (PTN)
By sending this command to ZEUS4-VD you receive SMS message with all currently programmed
telephone numbers (TN1 – TN0) . Send: ;PTN;
12.3 RECEIVE LINKS (PLN)
By sending this command to ZEUS4-VD you receive SMS message with all currently programmed
links (LN1 –LN11) . Send: ;PLN;
12.4 RECEIVE INPUT PARAMETERS (PIN)
By sending this command to ZEUS4-VD you receive SMS message with all currently programmed
Input parameters (IN1 – IN4). Send: ;PIN;
12.5 RECEIVE INPUT FILTER VALUE (PID)
By sending this command to ZEUS4-VD you receive SMS message with all currently programmed
Input filters (ID1 – ID4 and ION): ;PID;
12.6 RECEIVE DELAY BEFORE DIAL VALUE (PDD)
By sending this command to ZEUS4-VD you receive SMS message with all currently programmed
Input filters (DD1 – DD4 and DON). Send: ;PDD;
12.7 RECEIVE INPUT FILTER PARAMETERS (PIF)
By sending this command to ZEUS4-VD you receive SMS message with all currently programmed
filters parameters (IT1 – IT4, AR1 – AR4, IB1 – IB4) . Send: ;PIF;
12.8 RECEIVE CREDIT CHECK NUMBERS (PCN)
By sending this command to ZEUS4-VD you receive SMS message with all currently programmed
credit check parameters (CC1, CC2 and CC3) . Send: ;PCN;