39
14 CHECKING AND CHANGING SYSTEM STATUS
(ON/OFF)
14.1 CHECKING SYSTEM STATUS BY SMS COMMAND
By sending this command to ZEUS4-VD you receive SMS message with state of the system:
;SYS;
Return SMS can be:
;SYS= ON; System is ON (active inputs)
;SYS= OFF; System is OFF (inputs are not active)
14.2 CHANGING SYSTEM STATUS TO ON (SYSTEM ON)
By sending this command to ZEUS4-VD it switches the system ON.
;SYS=1; or ;SYS=ON;
14.3 CHANGING SYSTEM STATUS TO OFF (SYSTEM OFF)
By sending this command to ZEUS4-VD it switches the system OFF.
;SYS=0; or ;SYS=OFF;