30
11.6.13 ARST parameter
ARST parameter defines periodic auto restart time (in hours) of the device.
11.6.14 LNG parameter
LNG parameter switches between the preprogrammed languages:
0 - English
1 - Italian
2 - Slovenian
3 - Croatian
4 - Dutch
5 - German
6 - Spanish
11.6.15 LED parameter
LED parameter enables you to turn indication LEDs on ZEUS4-VD ON or OFF (0 – led OFF, 1 –
led ON)
11.6.16 BIDI parameter
BIDI is a special parameter used to change multiple settings in one step. Used for special purposes.
Contact sales for more information.
11.6.17 ADF parameter
Parameter is used to define voice refresh function, to prevent blocking of SIM in some networks.
When ADF time out expires call is made to TN1 telephone number.
11.6.18 SPO parameter
SPO parameter is used to define the starting point for storage of ZEUS4-VD parameters on SIM
card.
If this offset is needed than first configuration parameter has to be SPO, other than
follow latter. In addition programming must be done via SMS or direct USB
connection.
To Next Page
Loading...
