Martin Wizard - Basic Service; Cleaning Procedures

Basic service 23
B ASIC SERVICE 8
This chapter describes the maintenance procedures that you can perform
yourself:
• Cleaning
• Lamp maintenance
• Replacing fuses
• Updating firmware
CLEANING
Regular cleaning of the elements in the optical path, as well as the fans and air
vents, is vital to maintaining the operational quality of the Wizard.
Important! Excessive dust, smoke fluid, and particulate buildup degrades
performance and causes overheating and damage to the
fixture that is not covered by the warranty.
Cleaning the fan and air vents
To maintain adequate cooling, dust must be cleaned from the fan and air vents
periodically. Remove dust from the fan and air vents with a soft brush, cotton
swab, vacuum, or compressed air.
Cleaning optical components
Clean the optical components regularly. The presence of smudges or dust on
optical surfaces can reduce the strength of the light output and the quality of the
effects.