Masimo Root RDS-7 User Manual

Root Chapter 2: Setting Up
www.masimo.com 22 Masimo
Power On
The Power Button can be used for Power On, Standby, and Power Off. To
Power On, press the Power Button for two (2) seconds until a single audible
tone sounds.
Once Root turns on, if no Radical-7 or MOC-9 module is connected, the Root
display shows the following message: Please Connect a Device. The user is
now able to connect Radical-7 and MOC-9 modules.

Masimo Root RDS-7 Specifications

General

Brand	Masimo
Model	Root RDS-7
Category	Measuring Instruments
Language	English