Root Chapter 3: Operation
www.masimo.com 62 Masimo
Audio Pause
Audio Pause temporarily suspends all audible alarms on Root. When it is
active, visual alarms are not impacted and will still display. The Audio Pause
icon is located on the left side of the Status Bar – do not confuse with the
Sounds icon on the right side of the Status Bar.
By default, Audio Pause is inactive, and the icon appears in the following
way:
To activate Audio Pause, press the icon. It will turn red and the remaining
Audio Pause Duration time counts down next to the icon. The default duration
for Audio Pause is 120 seconds. In the example below, Audio Pause is
activated, and there are 117 seconds left until Audio Pause is inactivated
again.
To configure Audio Pause, see Sounds on page 57.
Audio Pause active. 117 seconds until Audio Pause is inactive.
Note: When Audio Pause is activated, powering off and then powering on
Root will return Audio Pause to its default inactive state.
Trend Download
Root can store up to 96 hours of trend data captured at 2-second intervals
from Radical-7 and MOC-9 modules. Trend data from Root can be
transferred to a computer via USB for evaluation.
Trend data is stored in non-volatile memory, so it is not erased when Root is
shut off. Trend data download is initiated using the Masimo Instrument
Configuration Tool, which converts the data to a .TXT or .CSV file.
To Next Page
Loading...
Need help?
General
