Root Chapter 9: Service and Maintenance
www.masimo.com 90 Masimo
Battery Test
To conduct a Battery Test
1. Fully charge Root by connecting it to AC power.
2. Verify that the Root Charging Indicator is illuminated.
3. When Root is fully charged, the Root Charging Indicator turns off.
4. Power On Root and verify that the Root Battery Indicator icon on the
Status Bar shows a full charge.
Repair Policy
Masimo or an Authorized Service Provider must perform warranty repair and
service. Have the malfunctioning device repaired.
Clean a contaminated and/or dirty device before returning, following the
cleaning procedure described in Cleaning on page 87. Make sure the device
is fully dry before packing.
For information on returning the device for service, see Return Procedure on
page 91.
To Next Page
Loading...
Need help?
General
