Master Image HORIZON3D - Error Code Table

Installation & Operation Manual | HORIZON3D
© MASTERIMAGE 3D, Inc.
52
9.1. Error Code Table
Potential error codes displayed on the 7-segment display along with their meanings are shown
in the table below:
ERROR CODE
LOG TEXT
MEANING
E01
ERR : ACT NOT DETECT
Actuator/Lift stand is not connected
E02
ERR : ACT NOT LIMIT
Positioned not in 2D or 3D
E03
ERR : ACT FAULT
Actuator fault
E10
ERR : LIFT ZERO
Zero position setting is required (for lift stand)
The indicated log text will also appear in the system log file when an error is detected.