Installation & Operation Manual | MI-WAVE3D
9.3.13. Network Configuration via the Monitor
Application
Configure the network settings of the MI-WAVE3D to operate on your network via
ethernet communication.
Click [Network Configuration] to access the settings window.
Enter the IP Address, Gateway, Subnet Mask, Primary DNS and Secondary DNS of your
network accordingly.
Click the [Save Config] button to accept any changes. Note the system will reboot in
order to recognize these changes.
Click your browser back button twice to return to the main screen.
The default IP Address is 192.168.10.95
The maximum Ethernet speed is 1Mbps
To Next Page
Loading...