Master Image MI-WAVE3D - Appendix A: Firmware Upgrade Process; Prerequisites for Upgrading Firmware; Firmware Upgrade Procedure

To Next Page

To Previous Page

Installation & Operation Manual | MI-WAVE3D

11. Appendix A – Firmware Upgrade Process for MI-WAVE3D

11.1. Prerequisites for Upgrading Firmware

1. Access the MasterImage ftp site using these

credentials:

ftp://masterimage3d.us

Password: M!3DuploadASIA

2. Download and install the MI-WAVE3D

firmware upgrading utility.

Installed shortcut: MITftp.exe

3. Download and save the latest firmware file

having a “*.hex” file extension.

Example:

MI-WAVE3D_v1.1.1_20141119.hex

4. Prepare a CAT5-E cable for connection to the

system.

11.2. Firmware Upgrade Procedure

1. Connect the MI-WAVE3D control box to your PC with the Ethernet cable.

2. Execute “MITftp” utility by double-

clicking the utility’s icon on your PC.