Matica MC320x - Printing; Card Printing; Mc320 X Printing Preferences; Print Settings

4-4
User Guide
MC320x USER GUIDE I
6-13
6 Printing
6.1 Card printing
Cards are usually printed and encoded via a card design software chosen by the user. However, if required, a
compatible non-proprietary application is available as an option for designing and printing cards. Cards can be
customized (logo, image and name) by creating graphic images and defining page formats.
The printing application recognizes the printer, allowing the user to create fully customized card designs.
6.1.1 MC320x Printing preferences
MC320x XPS driver printing preferences allow the user to set the printer properties based on the printing
operation requirements.
The MC320x printing preferences has the following tabs,
• Print
• Card front
• Card back
• Mag encoding
• About tab
6.1.2 Print settings
The print setting tab allows the user to set the orientation of the image on the card including duplex, card input &
output option, card type & the number of copies to be printed. Also, it provides information of printer configuration,
ribbon type & ribbon usage for the current ribbon fitted inside the printer.
Print image orientation setting.
User can set portrait or landscape
Duplex setting: The user can print both
sides of the card when using any duplex
enabled printer.
Card path selection: The drop down
menu allows the user to select & set the
feeder option & output option.
Card type selection: The drop down
menu allows the user to set the type of
card used for printing in the printer.
Current printer model & ribbon details