2 Product overview
The printer described in this user manual provides full color dye-sublimation or monochrome thermal transfer
printing on standard 54x86 mm plastic cards. PVC, PVC Composite, PET, ABS, PC and Re-printable cards
are supported (accordingly with varnished card product configuration). It is managed from the computer
through the USB port or via Ethernet/Wi-Fi.
The ribbon carrier, that comes with the printer, allows the ribbon to be replaced quickly and easily.
Several options are available so that the printer can be configured to operate in different types of
environments:
• Magnetic stripe encoder
• Smart Card Encoding Station with Contact and Contactless Smart Card encoder.
• 10/100 Ethernet connection
• Single Card Feed Option through Manual feeder
• Connection for external smart card encoding.
3 Getting started
The printer comes with several accessories; check carefully that they have all been received. This list may
vary depending on the location where the printer will be used and the configuration you have ordered.
The printer is shipped in special packaging designed to prevent damage during transportation. If any visible
damage is noticed upon reception, contact the dealer immediately.
Maintain the printer packaging intact and store it in a clean and dry place.
Note: If the printer must be returned, it must be returned integrally with its full original packaging (box,
cushions, and protective bags). If it is returned without its original packaging and any components are
damaged during transportation, such components will no longer be covered by the warranty. Matica
will also charge for the new packaging which will be required to ship the printer back.
To Next Page
Loading...
