Matica MC320x - Magnetic Encoding; Configuration

MC320x USER GUIDE I
8-3
8.3 Magnetic encoding
The magnetic encoder is a factory option and not available for purchasing as a module.
8.4 Configuration
Warning: Before proceeding with the configuration of the module make sure the printer is turned on and
connected to your computer via USB.
Note: Refer 5.1.1.5 of this document for the mag encoding setting & mag encoding tool tab.
Sample encoding format:
Layout test for sending data to track 1: 1:ABCDEFGHIJKL1234;
Layout test for sending data to track 2: 2:123456789456789999;
Layout test for sending data to track 3: ~3:123456789342567;