6.1.3 Card front settings
Panel mode setting: Based on the
type of ribbon used inside the
printer, the user can set color,
monochrome & overlay options..
** For printing color & overlay on the
front side & monochrome K on the
back when using YMCKO. Ribbon
saver option must be enabled.
Panel adjustment: The user can
manually adjust the brightness,
contrast and sharpness based on
the print image requirement.
Monochrome option: This option allows the user to adjust the
contrast and the half tone of the monochrome panel.
Overlay option: This option allows the user to adjust the contrast of
the overlay panel and the area in which the overlay will be printed.
To Next Page
Loading...
