7.3 Card path advanced cleaning
The card path advanced cleaning procedure is required after performing five standard cleaning
procedures:
.
• After every 5000 prints, the printer will alert the user for ‘Advanced Cleaning’ by displaying a red blinking red LED
• Advanced cleaning is performed using the T shaped card as explained below.
The procedure involves cleaning the card path, removing the dust on the rollers, and cleaning the
magnetic head.
• A software-guided procedure will assist in carrying out the cleaning operations.
7.4 Advanced cleaning
1. To perform the advanced clean, select ‘Advance printer clean” from drop down menu available in the printer
properties tool tab.
Note: a) Insert the T-card in the back slot of the printer
To Next Page
Loading...
