Matrix
198
Vision System Manual
4704-1-02-1-1
4704-1-02-2-1
4704-1-02-3-1
4705-1-02-0
3301-1-0-00
3301-1-1-00
3301-1-2-02
3302-1-0-01
3302-1-1-01
3302-1-2-02
Important Points:
• By default, all the station groups contain first four stations. Hence, if less number of stations are to be
programmed in a station group then assign the same stations again for remaining destinations within the
group. As shown in the example above, station group 1 contains only one station i.e. station 21. Hence all
other destinations within a group are assigned same station.
• By default, station group ‘00’ as assigned to all trunks.
Relevant Topics:
1.
Time Table 181
2. Station Group 163
=X=X=
To Next Page
Loading...
