Matrix
220
Vision System Manual
Program the destination number for CLI based ECF 1606-1-Index-Destnation Number
Program the CLI transfer mode 1607-Code
Default the CLI Parameters 1601-*
Class of Service (COS)
Enable/disable a feature in a COS group 4602-1-COS group-Feature Index-Code
Enable/disable a feature in all the COS Group 4602-*-Feature Index-Code
Default all features in a COS Group 4601-1-COS Group-#
Default all features in all the COS Group 4601-*-#
Assign a COS Group to a station during day time 4610-1-Station-COS Group
Assign a COS Group to all stations during day time 4610-*-COS Group
Assign a COS Group to a station during night time 4611-1-Station-COS Group
Assign a COS Group to all stations during night time 4611-*-COS Group
Configuration Reports
Download configuration report 1100
Department Call
Program station group as department group 4801-1-Department Group-Station Group
Program same station group to all department groups 4801-*-Station Group
Dial by Name
Program the station name 4103-1-Station-Name
Clear a station name 4103-1-Station-#
Clear all the station name 4103-*-#
Direct Inward Dialing (DID)
Activate DID on a trunk during day time 3501-1-Trunk-Code
Activate DID on all trunk during day time 3501-*-Code
Activate DID on a trunk during night time 3502-1-Trunk-Code
Activate DID on all trunk during night time 3502-*-Code
Act. Voice Guidance for DID on a trunk during Daytime 3503-1-Trunk-Code
Activate VG for DID on all trunks during daytime 3503-*-Code
Activate VG for DID on a trunk during nighttime 3504-1-Trunk-Code
Activate VG for DID on all trunks during nighttime 3504-*-Code
Direct Inward System Access (DOSA)
Enable/disable DOSA on a trunk during day time 3601-1-Trunk-Code
Enable/disable DOSA on all the trunks during day time 3601-*-Code
Enable/disable DOSA on a trunk during night time 3602-1-Trunk-Code
Enable/disable DOSA on all the trunks during night time 3602-*-Code
Door Phone
Program door phone port 1701-Code
Assign station group as door phone group for daytime 1702-Station Group
Assign station group as door phone group for nighttime 1703-Station Group
External Call Forward (ECF)
Enable/disable ECF on a trunk during day time 3701-1-Trunk-Code
Enable/disable ECF on all trunks during day time 3701-*-Code
Enable/disable ECF on a trunk during night time 3702-1-Trunk-Code
Enable/disable ECF on all trunks during night time 3702-*-Code
Assign trunk group to forward the calls of a trunk 3703-1-Trunk-Trunk Access Group
Assign dest. No. where the calls are to be forwerded for a trunk 3704-1-Trunk-Telephone number-#
Flash Timer
Program Flash Timer 4102-1-Station-Flash Timer
Program same flash timer for all the stations 4102-*-Flash Timer
To Next Page
Loading...
Need help?
General
