Vision System Manual
221
Matrix
Flexible Numbers
Program the flexible number for a station 4201-1-Station-Flexible Number-#*
Clear the flexible numbers of all the stations 4201-*-0
Default the flexible numbers of all the stations 4201-*-#
Internet Ready Port
Activate/deactivate Internet ready Port 2101-1/0
Least Cost Routing (LCR)
Program LCR type for a trunk access group 3401-1-Trunk Access Group-LCR Type
Program LCR Type for all Trunk Access Groups 3401-*-LCR Type
Assign service provide code to each trunk 3402-1-Trunk-SP Code
Assign same service provider to all trunks 3402-*-SP Code
Program time zone index 3412-1-Time Zone Index-Start Time-End Time
Program the Service Provider sequence for the each Time zone 3413-1-Time Zone Index-SP0-SP1-SP2-SP3
Default Time Zone wise LCR table 3411-*-#
Program number Index 3422-1-Number Index-Number String-#*
Program the Service Provider sequence for the each no. Index 3423-1-Number index-SP0-SP1-SP2-SP3
Default Number wise LCR tables 3421-*-#
Program time Zone Index for Mixed LCR 3432-1-Time Zone-Start Time-End Time
Program Number Index for Mixed LCR 3433-1-Number Index-Number String-#*
Program the Service Provider sequence for the each time Zone 3434-1-No. Index-TZ Index-SP0-SP1-SP2-SP3
Default Mixed LCR table 3431-*-#
Music On Hold (MOH)
Select music source 1102-Code
Operator
Program the Operator Station 1101-Station
Real Time Clock
Set Current Date 1001-Date-Month-Year
Set Current Day 1002-Day
Set Current Time 1003-Hours-Minutes
Relay Port
Program the mode of the relay port 1801-Mode
Program the ON time in the relay port table 1802-1-Index-Switch On Time
Clear an ON time entry from the relay port table 1802-1-Index-#
Clear all the ON time entries from the relay port table 1802-*-#
Program OFF time in the relay port table 1803-1-Index-Switch Off time
Clear an OFF time entry from the relay port table 1803-1-Index-#
Clear all the OFF time entries from the relay port table 1803-*-#
Program relay port ON duration timer 3036-Seconds
Program relay port OFF duration timer 3037-Seconds
Scheduled Dialing
Program a number in the schedule dialing table 2002-1-Number index-Number-#*
Clear all the numbers in the scheduled dialing table 2002-*-#
Program trunk access group for the number to be dialed out 2003-1-Number Index-Trunk Access Group
Program time at which the number is to be dialed out 2004-1-Number Index-Time
Default all the parameters related to scheduled dialing 2001-#
Security Dialer
Enable/disable DIP 1901-1/0
Program the DIP as Active High or Active Low 1902-1/0
Assign a trunk access group to a DIP 1903-Trunk Access Group
Program the Emer. phone number where the call is to be made 1904-Index-Emergency Phone Number-#*