Matrix Vision User Manual

Vision System Manual
59
Matrix
External Call Waiting Tone
This tone is of two ticks followed by a longer off time of approximately 3 seconds. Busy programmed destination
station gets this tone when there is a fresh TELCO call.
• Sound: Beep...Beep………....Beep...Beep
This tone continues for transfer-On busy timer.
Feature Tone
Short beep followed by a longer off duration repeated every second. The feature tone is given to the user
when he has one party as held party and tires to access a feature same time as dial tone. By default, feature
tone remains for 7 seconds.
• Sound: Beep… Beep
Feature Confirmation Tone
This tone is continuous, fast beeps. The Vision confirms successful usage of features with this tone. The
confirmation tone remains for 7 seconds. This is called Feature Confirmation Tone Timer and is programmable.
• Sound: Beep... Beep... Beep
Use following command to program the Feature Confirmation Tone Timer:
3005-Seconds
Range = 001 to 255 seconds.
Default = 003 seconds.
Programming Tone
Short beeps followed by a longer off duration repeated every second. It is exactly same as the feature tone.
The Vision prompts you to enter fresh commands during programming with this tone.
Programming Inter Digit Timer
This timer signifies the time for which the Vision waits between accepting two digits from the SE/SA. This timer is
loaded when the SE/SA dials first digit and waits for the seconds digit.
Use following command to program Programming Inter Digit Timer:
3006-Seconds
Range = 001 to 255 seconds.
Default = 015 seconds.
Programming Error Tone
This tone is exactly same as the Error Tone. This tone is given when some wrong programming command is
dialed. This tone remains for 3 seconds. This Programming Error Tone timer is programmable.
• Sound: Too…Too…Too…Too
Use following command to program the Programming Error Tone Timer:
3007-Seconds
Range = 001 to 255 seconds.
Default = 003 seconds.
Programming Confirmation Tone
This is exactly same as the feature confirmation tone. This tone is continuous, fast beeps. During programming,
this tone indicates that valid command is received by the system and it has taken necessary action. This tone
remains for 3 seconds. This is called Programming Confirmation Tone Timer and is programmable.
• Sound: Beep... Beep... Beep

Matrix Vision Specifications

General

Brand	Matrix
Model	Vision
Category	PBX
Language	English