Matrix Vision User Manual

Vision System Manual
71
Matrix
Relevant features from this list can be selected and put in a group. One can make few feature access groups
depending upon the requirement. First group contains none of the features. Second group contain only
internal dialing. Third group contain very common features like Call Pick Up, Call Transfer, Internal Dialing etc.
Fourth group contain more advanced features and so on. Eight group contain all the features. Once
programmed, COS groups may look like:
Group 00 01 02 03 04 … 28 29 30
0NNNNN
…
NNN
1NNYYN
…
NYN
2YNNYY
…
YYY
3NNNYY
…
NNN
4YYYNY
…
NYN
5YYYNY
…
YYN
6YYYYY
…
YYY
7YYYYY
…
YYY
By default, in all the 8 COS groups a set of features is allowed based on common requirement. Default COS
groups chart is attached herewith:
Group00010203040506070809101112131415161718192021222324252627282930
0
NNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNN
1
YNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNN
2
YYYYYYYYN
YNNNNNNNNNNNNNNNNNNNNN
3
YYYYYYYYY
YYYYYYNNNNNNNNNNNNNNNN
4
YYYYYYYYY
YYYYYYYYYYYYNNNNNNNNNN
5
YYYYYYYYY
YYYYYYYYYYYYYYNNNNNNNN
6
YYYYYYYYY
YYYYYYYYYYYYYYYYYYYNNN
7
YYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYY
Now, these groups can be allocated to the users depending upon the hierarchy of the user in the organization.
A user can be assigned different COS groups for day time and night time. Once these groups are assigned to
the users, the user’s COS table looks like:
Station
Number
COS Group for Day
Time
COS Group for
Ni
g
ht time
00 7 1
01 6 4
02 4 4
03 3 3
04 6 4
…… …
…… …
Following points are relevant:
• Maximum 8 feature groups can be formed (0-7).
• Each feature can be enabled or disabled in each group.
• 2nd group is the default COS group.
The following flowchart elaborates this procedure.

Matrix Vision Specifications

General

Brand	Matrix
Model	Vision
Category	PBX
Language	English