Matrix Vision User Manual

Matrix
72
Vision System Manual
Start
Read the list of the features
offered by the system.
Preapre a list of all stations.
Write features need for both day time and
night time for each individual station
against his name in the list of stations.
You will notice that features needed by
many stations are identical. Hence
feature variety gets reduced.
Each variety is called a COS
group. Assign a group number to it.
This way prepare all COS groups.
A
ssign COS groups to all the stations.
Print System Parameters reports
and verify the programming.
Test the programming by checking
features from every station.
End
How to program?
Step 1: Decide the number of COS groups to be used.
Step 2: Prepare list of the features required in each COS group and program it using command 4602.
Step 3: Default the features in COS group using command 4601 (if required).
Step 4: Assign COS group to a station during day time using command 4610.
Step 5: Assign COS group to a station during night time using command 4611.

Matrix Vision Specifications

General

Brand	Matrix
Model	Vision
Category	PBX
Language	English