59
Appendices
®
TTS x Selects which
tweaktable to
use
A ‘0’ will select the Canned
tweaktable and a ‘1’ will
select the User tweaktable
Syntax DATA Function Comment
TTT Returns the
tweaktable type
Returns a ‘0’ if the Canned
tweaktable is selected and a
‘1’ if the User tweaktable is
selected
TTW vvcctttt...
tttt
Write tweak
table data for
1 volume to
WellMate
vv - Volume, cc count of
tweaks, tttt - tweak data, fi rst
character is a sign (+/-) last
three are decimal digits
W xxx
Possible
values:
002–999
Wait time: (xxx *
10) mSEC
Min. delay time = .002
(20mSEC)
Wait time = time that the
system waits between
executing column dispenses
(P1 commands). Must
build in wait time to avoid
dispenses on crosshairs
between wells.
X0 Stage: Move to
X home position
Stage homes.
X1 Stage: Move to
starting sensor
(left-most)
position
Stage moves to its left-most
position, which is the 384
offset position.
X2 Stage: Move
to dispensing
position to
waste-fl uid
reservoir
(overfl ow)
Position used for executing
a PRIME operation;
command must always
precede P0 command.
To Next Page
Loading...