Introduction
MA100-1010-4G is LTE Ethernet router providing data communications via the
public cellular network.
The MA100-1010-4G utilises an industrial 32-bit CPU with an embedded operating
system. The device supports RS232 connection, four Ethernet ports and Wi-Fi that
conveniently and transparently connect devices to a cellular network, allowing
you to connect to your existing serial and Ethernet devices with minimal
configuration.
The MA100-1010-4G has been widely used in M2M applications, such as intelligent
transportation, smart grid, industrial automation and telemetry.
Features and Benefits
Designed for Industrial Application
• Industrial cellular module MC7430
• High-powered industrial 32bit CPU
• Industrial GPS module
• Supports low power consumption mode, including sleep mode.
• Metal housing.
• Voltage range: 5~36VDC
• Auto recovery functionality, including online detection, and auto redial.
• Ethernet port: 1.5KV magnetic isolation protection
• RS232: 15KV ESD protection
• SIM port: 15KV ESD protection
• Power port 2.5mm Barrel connector: reverse-voltage and overvoltage
protection
• SMA antenna ports - gender varies for different radios
• IP Stack Auto mode
• IP / web based user interface for remote management, maintenance and
configuration.
To Next Page
Loading...
Need help?
General
