GPS Speed Threshhold：The GPS speed threshold of update GPS information
Device ID：The ID of this device
Append the device ID to the tail of GPS information: Whether append the ID to the GPS
information
GPS Information Contents: Contents selection
When GPS output interface is serial port, we should set the following serial port settings:
Administration
Management
The Management screen allows users to change the router's settings. On this page, users will find
most of the configurable items of the router code.
The new password must not exceed 32 characters in length and must not include any spaces.
Enter the new password a second time to confirm it.
Note：Default username and password is admin.
It is strongly recommended that users to change the factory default password of the router,
all users who try to access the router's web port will be prompted for the router's password.
Web Access
This feature allows you to manage the router using either HTTP protocol or the HTTPS protocol. If
users choose to disable this feature, a manual reboot will be required. You can also activate or
not the router information web page. It's now possible to password protect this page (same
username and password than above).
To Next Page
Loading...
Need help?
General
