11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
45
3. Fasten internal control to bracket using
screws, fl at washee (Kit items) (FIG. 45-1).
BOLTING INTERNAL CONTROL SWITCH
TO BRACKET
FIG. 45-1
INTERNAL
CONTROL SWITCH
BRACKET
INTERNAL
CONTROL SWITCH
LOCK NUT, 10-24
(2 PLACES)
FLAT WASHER #10
(2 PLACES)
BUTTON SCREW, 10-24,
1-1/2” LG.
(2 PLACES)
4. Use internal control bracket to mark
and drill 4 holes for mounting next to
vertical post (curb side). Bolt bracket to
vehicle body with self-tapping screws
(FIG. 45-2).
BOLTING INTERNAL SWITCH BRACKET
TO VEHICLE BODY
FIG. 45-2
VEHICLE BODY
VERTICAL POST
(CURB SIDE)
INTERNAL
CONTROL
BRACKET
SELF-TAPPING SCREW,
10-24, 1/2” LG.
(4 PLACES)
FLAT WASHER #10
(4 PLACES)
18”- 24”
STEP 3 - ATTACH CONTROL SWITCHES - Continued
To Next Page
Loading...
