Maxon GPSLR Series - Step 2 - Weld J-Box to Underbody

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
41
STEP 2 - WELD J-BOX TO UNDERBODY
1. Position two J-box mounting fl ats (Kit items) on vehicle
crossmembers (FIGS. 41-1 and 41-1A). Mark position
of fl ats at the bottom of the crossmembers and cut off
excess length of fl ats as shown in FIG. 41-1A.
J-BOX MOUNTING
FLATS
FIG. 41-1A
POSITIONING J-BOX MOUNTING FLATS
FIG. 41-1
CUT OFF
EXCESS
MARK LINE
(2 PLACES)
CROSSMEMBERS
DRAFT 05-03-24