Maxon GPSLR Series - Step 8 - Attach Sliding Axle Stops (if Required)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
62
CAUTION
The sliding axle assembly on a trailer can collide with a Liftgate mounted
on the slide rails. To prevent damage to Liftgate and trailer, install stops on
the slide rails to keep the sliding axles from hitting Liftgate. Refer to Liftgate
clearance dimensions in this section of the manual.
STEP 8 - ATTACH SLIDING AXLE STOPS (IF REQUIRED)
NOTE: If the Liftgate is mounted on a slide-axle trailer, attach stops on the slide rails
to prevent the slide axles from hitting the Liftgate. Refer to the VEHICLE
REQUIREMENTS section in this manual.
DRAFT 05-03-24