11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
24
WELD GUSSETS TO TRAILER
2. Weld installation gussets (Kit items) to LH slide
rail and crossmembers as shown in FIG. 24-2.
Repeat for RH slide rail.
WELDING INSTALLATION GUSSETS TO LH SLIDE RAIL
AND CROSSMEMBERS (LIFTGATE NOT SHOWN)
FIG. 24-2
LIFTGATE COVERED WITH WELDING BLANKET
FIG. 24-1
WELDING
BLANKET
1. Cover Liftgate with welding blanket (FIG. 24-1).
1/4”
2 PLACES
1/4”
STEP 1 - INSTALLING LIFTGATE ON TRAILERS - Cont’d
NOTE: For clarity Liftgate is not shown in the illustration below.
NOTE: Grind galvanized surface material from areas to be welded.
To Next Page
Loading...
