Maxon GPSLR Series - Page 23

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
23
PLATES INSTALLED FLUSH AGAINST INBOARD SIDE OF SLIDE RAILS
FIG. 23-1
SLIDE RAIL
INSTALLATION PLATE
SLIDE RAIL
INSTALLATION PLATE
STEP 1 - INSTALLING LIFTGATE ON TRAILERS - Cont’d
BOLTING INSTALLATION PLATES TO TRAILER WITH 42-5/8” OR 48-5/8”
SLIDE RAILS
FIG. 23-2
FIG. 23-2A
SLIDE RAIL
HEX BOLT, 1/2”-13, 2”
LG.
(16 PLACES)
FLANGE NUT, 1/2”-13 (16
PLACES)
BUSHING
(16 PLACES)
HEX BOLT,
1/2”-13, 2” LG.
BUSHING
FLANGE NUT,
1/2”-13
WASHER,
2-1/4”
WASHER, 2-1/4”
(16 PLACES)
INSTALLATION
PLATE
NOTE: For clarity Liftgate is not shown in the illustrations below.
INSTALLATION PLATE
(4 PLACES)
42-5/8” OR 48-5/8”
NOTE: Flip bushings for a snug fi t in 2 sizes of holes on
slide rail. See FIG. 23-2A.
DRAFT 05-03-24