Maxon GPSLR Series - Page 22

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
22
INSTALLATION PLATES INSTALLED FLUSH AGAINST INBOARD SIDE OF
SLIDE RAILS
FIG. 22-1
SLIDE RAIL
INSTALLATION PLATE
SLIDE RAIL
INSTALLATION PLATE
42-1/8” OR 48-1/8”
BOLTING INSTALLATION PLATES TO TRAILER WITH 42-1/8” OR 48-1/8”
SLIDE RAILS
FIG. 22-2
FIG. 22-2A
SLIDE RAIL
INSTALLATION
PLATE
HEX BOLT, 1/2”-13, 2” LG
(16 PLACES)
FLANGE NUT, 1/2”-13
(16 PLACES)
BUSHING
(16 PLACES)
HEX BOLT,
1/2”-13, 2” LG.
BUSHING
FLANGE NUT,
1/2”-13
NOTE: Flip bushings for a snug fi t in 2 sizes of holes on
slide rail. See FIG. 22-2A.
STEP 1 - INSTALLING LIFTGATE ON TRAILERS - Cont’d
NOTE: For clarity Liftgate is not shown in the illustrations below.
INSTALLATION PLATE
(4 PLACES)
DRAFT 05-03-24