Maxon GPSLR Series - Page 47

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
47
J-BOX
6. Run control cable from J-box, un-
der vehicle body (see dashed line,
(FIG. 47-1), and up through vehicle
fl oor. Pull control cable through 3/4“
hole (FIG. 47-1).
INTERNAL
CONTROL SWITCH
EXTERNAL
CONTROL
SWITCH
3/4”
HOLE
CONTROL
CABLE
7. Run the internal control switch cable to
the J-box (FIG. 47-1).
ROUTING CONTROL SWITCH CABLES
FIG. 47-1
8. Run the external control switch cable
to the J-box (FIG. 47-1).
STEP 3 - ATTACH CONTROL SWITCHES - Continued
DRAFT 05-03-24