Maxon GPSLR Series - Page 65

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
65
4. Hook chain to platform (FIG. 65-1).
Then, position chain mounting weld-
ment to bottom of crossmembers.
Keep 1/2” to 3/4” slack in chain.
6. Hook and unhook chain from
the loop on the platform.
Hook should be easy to dis-
engage from loop (FIG. 65-1).
CHAIN MOUNTING
WELDMENT
SNAP HOOK
& CHAIN
POSITIONING & TACK WELDING
CHAIN MOUNTING WELDMENT
FIG. 65-1
1/4”
TACK
1/2”-3/4”
SLACK
FINISH WELDING CHAIN MOUNTING
WELDMENT
FIG. 65-2
7. When chain mounting weldment
is in correct position, fi nish weld-
ing to vehicle crossmembers as
shown in FIG. 65-2.
1/4”
AS MUCH AS
POSSIBLE
STEP 9 - ATTACH SAFETY CHAIN - Continued
5. Tack weld the chain mount-
ing weldment as shown in
FIG. 65-1.
LOOP
DRAFT 05-03-24