11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
8
MAIN
ASSEMBLY
INSTALLATION JIG
PARTS BOXES
GPSLRT LIFTGATE COMPONENTS FOR SHIPMENT
FIG. 8-1
STANDARD LIFTGATE COMPONENTS - Continued
NOTE: Vertical channels on Liftgate installation jig may
need to be cut shorter to prevent interference with
underbody of vehicle. See FIG. 8-1. The shaded
portion of each channel shows how much of
the channel that may need to be cut to prevent
interference. Before installation, keep Liftgate with
the installation jig on the ground and covered with
a welding blanket. Cut the channels only when
Liftgate is protected from debris.
To Next Page
Loading...
