11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
28
UNBOLT TO REPOSITION
MOUNTING PLATE
1/4”
TACK
(TYPICAL - RH & LH
MOUNTING PLATES)
TE-25 & TE-30
REPOSITIONING PAINTED MOUNTING PLATE
(RH SIDE SHOWN)
FIG. 28-2
MAIN FRAME
(CUT-AWAY VIEW)
MOUNTING
PLATE
VEHICLE FRAME
(TYPICAL TRUCK
FRAME SHOWN)
CUT LINE & TOP WELD
(IF NECESSARY)
1/2”
STEP 2 - WELD LIFTGATE TO VEHICLE - Continued
UNBOLT TO REPOSITION
MOUNTING PLATE
MAIN FRAME
(CUT-AWAY VIEW)
MOUNTING
PLATE
VEHICLE FRAME
(TYPICAL TRUCK
FRAME SHOWN)
CUT LINE & TOP WELD
(IF NECESSARY)
1/2”
TE15 & TE-20
REPOSITIONING PAINTED MOUNTING PLATE
(RH SIDE SHOWN)
FIG. 28-1
1/4”
TACK
(TYPICAL - RH & LH
MOUNTING PLATES)
4. Unbolt mounting plate
from main frame. Reposi-
tion mounting plate against
vehicle frame. Tack weld
as shown in FIGS. 28-1 or
28-2. Repeat for second
mounting plate (reposition
and tack weld).
To Next Page
Loading...
