L3 Turbo Engine
Fuel System
Specifications:
M6_MPS_01T002
OTE: The L3 Turbo engine was designed to consume 98 octane (RON (
Octane Number)) fuel. If 98 octane (RON) fuel is not availabel the vehicle can
r
NOTE:
ystem. To release the
Specification
Type Electro-magnetic (1.0...1.2 Ohm)
Type of fuel delivery Top-feed
Type of drive Voltage
Pressure regulator control pressure
(within the fuel tank)
kPa Approx. 430
Relief valve control pressure
(within the fuel delivery pipe)
Mpa Approx. 13
Pre delivery fuel pump type Electric
High pressure fuel pump type Mechanic
Fuel tank capacity L 60
Item
Injector
N
Research
be operated using 95 octane (RON) fuel which will result in decreased powe
output. Using fuel with lower octane can cause engine knocking an serious
engine damage.
Working on the high pressure fuel system can be dangerous. Always release
fuel pressure before opening the high pressure fuel s
pressure remove the fuel pump relay, start engine and allow engine to stop.
Then crank engine with the starter until fuel pressure is discharged.
01-32 Service Training Mazda6 MPS Supplement
To Next Page
Loading...
