Black plate (145,1)
qSpeedometer
The speedom eter indicates the speed of
the vehicle.
qOdometer, Trip Meter and Trip
Meter Selector
The display mode can be changed
between trip meter A and trip meter B by
pressing the selector while one of them is
displayed. The selected mode will be
displayed.
Type A
Press the selector
Press the selector
Trip meter A
Odometer
Trip meter B
Odometer
Type B
Press the selector
Press the selector
Trip meter A
Odometer
Trip meter B
Odometer
NOTE
When the ignition is switched to ACC or OFF,
the odometer or trip meters cannot be
displayed, however, pressing the selector can
inadvertently switch the trip meters or reset
them during an approximate ten-minute period
in the following cases:
l
After the ignition is switched to OFF from
ON.
l
After the driver's door is opened.
Odometer
The odometer record s the total distance
the vehicle has been driven.
Trip meter
The trip meter can record the total
distance of two trips. One is recorded in
trip met er A, and the other is recorded in
trip met er B.
When Driving
Instrument Cluster and Display
4-11
CX-5_8DV2-EA-14K_Edition5 Page145
Tuesday, November 24 2015 8:46 AM
Form No.8DV2-EA-14K
To Next Page
Loading...
