Black plate (503,1)
q
Leather Upholstery Maintenance
í
1. Remove dust and sand using a vacuum
cleaner.
2. Wipe off the soiled area with a soft
cloth and a suit able, special cleaner or
a soft cloth soaked in a mild detergent
(about 5%) diluted with water.
3. Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
4. Remove moi sture with a dry, soft cloth
and allow the leather to further dry in a
well-ventilated, shaded area. If the
leather gets wet such as from rain,
remove the moisture and dry it as soon
as possible.
NOTE
l
Because genuine leather is a natural
material, its surface is not uniform and it
may have natural scars, scratches, and
wrinkles.
l
To maintain the quality for as long as
possible, periodical maintenance, about
twice a year, is recommended.
l
If the leather upholstery comes into contact
with any of the following, clean it
immediately.
Leaving it uncleaned could cause
premature wear, mold, or stains.
l
Sand or dirt
l
Grease or oil, such as hand cream
l
Alcohol, such as in cosmetic or hair
dressing items
l
If the leather upholstery gets wet, promptly
remove moisture with a dry cloth.
Remaining moisture on the surface may
cause deterioration such as hardening and
shrinkage.
l
Exposure to direct sunlight for long periods
may cause deterioration and shrinkage.
When parking the car under direct sunlight
for long periods, shade the interior using
sunshades.
l
Do not leave vinyl products on the leather
upholstery for long periods. They may
affect the leather quality and coloring. If
the cabin temperature becomes hot, the
vinyl may deteriorate and adhere to the
genuine leather.
qPlastic Part Maintenance
CAUTION
Do not use polishing agents.
Depending on the product
ingredients, they could cause
discoloration, stains, cracks or
peeling of the coating.
Maintenance and Care
Appearance Care
6-71
í
Some models.
CX-5_8DV2-EA-14K_Edition5 Page503
Tuesday, November 24 2015 8:51 AM
Form No.8DV2-EA-14K
To Next Page
Loading...
