Black plate (274,1)
Laser Sensor (Front)
í
Your vehicle is equipped with a laser sensor (front). The laser sensor (front) is positioned
near the rearview mirror and used by the following systems.
l
Smart Brake Support (SBS)
l
Smart City Brake Support (SCBS)
CAUTION
Heed the following precautions to assure correct operation of the system.
Ø Keep the win dshield clean at all times.
Ø Do not apply stickers to the surface of the windshield (including transparent
stickers).
Ø If cracks or damage caused by flying gravel or debris is visible near the laser
sensor (front), stop using the system immediately and have your vehicle inspected
by an Authorized Mazda Dealer.
Refer to Personalization Features on how to turn off the system. (page 9-10)
Ø Do not apply a coating agent to the windshield.
Ø When replacing the windshield wipers or windshield, consult an Authorized
Mazda Dealer.
Ø Never remove the sensor.
Ø A removed sensor will not meet the conditions for a class 1M laser under the IEC
60825-1 specification and therefore eye safety cannot be assured.
Ø Do not peer into the sensor using optical instruments with a magnification
function such as magnifying glasses, and microscopic and objective lenses within
a distance of 100 mm (3.94 in) from the sensor.
4-140
When Driving
í
Some models.
i-ACTIVSENSE
CX-5_8DV2-EA-14K_Edition5 Page274
Tuesday, November 24 2015 8:48 AM
Form No.8DV2-EA-14K
To Next Page
Loading...
