Black plate (235,1)
qLDWS Warning
If the system determines that there is the
possibility of a lane departure, the LDWS
warning beep activates and the LDWS
warning light flashes. (vehicle with type B
instrument cluster)
Vehicles with type A instrumen t cluster, if
there is the possibility of a lane departure,
the system indicates the d irection it
determines that the vehicle is deviating in
the multi-information display.
Operate the steering wheel appropriately
and steer the vehicle to the center of the
lane.
Indication on display
NOTE
l
If the LDWS warning sound is set to
rumble
*1
, the sound will be heard from the
vehicle speaker on the side which the
system determined the vehicle may be
deviating from its lane.
l
It may be difficult to hear the LDWS
warning beep depending on the
surrounding conditions such as outside
noise.
l
The volume of the LDWS warning sound
can be changed.
Refer to Personalization Features on page
9-10.
l
The type of warning sound (rumble
*1
/beep)
on the LDWS can be changed.
Refer to Personalization Features on page
9-10.
*1 A rumble strip is a series of grooves in the
road pavement surface positioned at
specific intervals, and when the vehicle
passes over it a vibration and rumble
sound is produced which alerts the driver
that the vehicle is departing from the lane.
The rumble sound is a reproduction of the
sound which occurs when a vehicle passes
over a rumble strip.
Rumble
Groove
When Driving
i-ACTIVSENSE
4-101
CX-5_8DV2-EA-14K_Edition5 Page235
Tuesday, November 24 2015 8:47 AM
Form No.8DV2-EA-14K
To Next Page
Loading...
