Black plate (356,1)
qHow to use iPod mode (Type A)
Track down/Reverse button
Track up/Fast-forward button
List up button
List down button
Audio display
Random button
Category down button Category up button
Play/Pause button
Repeat button
USB/AUX button
Scan button
Text button
File dial
An iPod may not be compatible
depending on the model or OS version. In
this case, an error message is displayed.
NOTE
The iPod functions on the iPod cannot be
operated while it is connected to the unit
because the unit controls the iPod functions.
Playback
1. Switch the ignition to ACC or ON.
2. Press the power/volume dial to turn the
audio system on.
3. Press the USB/AUX button (
)to
switch to the iPod mode and start
playback.
NOTE
l
When an iPod is not connected, the mode
does not switch to the iPod mode.
l
When there is no playable data in the iPod,
“NO CONTENTS” is flashed.
l
Do not remove the iPod while in the iPod
mode. Otherwise, the data could be
damaged.
Pause
To stop playba ck, press the play/p ause
button (5).
Press the button again to resume
playback.
Fast-forward/Reverse
Press and hold the fast-forward button
(
) to advance through a track at high
speed.
Press and hold the reverse button (
)to
reverse through a track at high speed.
Track search
Press the track up button (
) or turn the
file dial clockwise once to skip forward to
the beginning of the next track.
Press the track down button (
) or turn
the file dial counterclockwise within a few
seconds (depends on iPod software
version) after playback begins to track
down to the beginning of the previous
track.
Press the track down button (
) or turn
the file dial counterclockwise after a few
seconds (depends on iPod software
version) have elapsed to start playback
from the beginning of the current track.
5-60
Interior Features
Audio System
CX-5_8DV2-EA-14K_Edition5 Page356
Tuesday, November 24 2015 8:49 AM
Form No.8DV2-EA-14K
To Next Page
Loading...
