Black plate (489,1)
Luggage compartment light
1. Wrap a small flathead screwdri ver with
a soft cloth to prevent damage to the
lens and remove the lens unit by
carefully prying on the edge of the lens
unit with the flathead screwdriver.
2. Disconnect the electrical connector
from the bulb by pressing the tab on
the connector with your finge r and
pulling the connector.
CAUTION
When replacing the bulb always
disconnect the connector first.
Otherwise, electric and electronic
devices could be shorted.
3. Insert the flathead screwdriver into the
gap between the lens and the lens unit,
and then slide the screwdriver to detach
the lens.
4. Disconnect the bulb by pulling it out.
5. Install the new bulb in the reverse order
of the removal procedure.
Maintenance and Care
Owner Maintenance
6-57
CX-5_8DV2-EA-14K_Edition5 Page489
Tuesday, November 24 2015 8:50 AM
Form No.8DV2-EA-14K
To Next Page
Loading...
